Advertisement
APP QUICK START – SETTINGS AND CONNECTION
1. Mobile phone IP address
When the smart phone or Pad is connected to local network, the IP will automatically
show on this area.
2. AUTO
Press AUTO to search the device IP.
3. Device IP address
When the IP is found, the APP will connect to the device automatically.
4. Manually Enter
Manually enter the device IP to connect to the device.
5. MASTER/SLAVE Selection
When the MASTER amplifier connecting with additional SLAVE1/SLAVE2 amplifiers,
press one of these buttons to determine which amplifier will be controlled.
6. 6 Zones/4 Zones Selection
Select 6 Zones or 4 Zones for corresponding MASTER/SLAVE1/SLAVE2 amplifier.
Note: MAP-1200PRE is 6 zone controller.
28
Advertisement
