2.2
Start-up
To switch on:
O N
O F F
— set the system main switch to "ON"
— press
The unit display turns on.
9
Use the remote control within a range of 7 metres, aiming
it at the receiver and making sure that there is no obstacle
in-between.
9
The working range could be reduced if electronic starters or
TV sets are nearby.
9
Do not leave the remote control under direct sunlight, near
heat sources and protect it against water and dust.
9
The remote control is equipped with 1.5 V AAA batteries that
must be removed when climate control system is left un-
used for over 3 months.
9
The compressor activates 3 minutes after unit activation.
2.3
Use with closed flap
DooR CloSED
1
2
3
1
Display
2
On- Off key
3
Quick function keys
When the door is closed, you can activate the quick functions,
TIMER
POWER
such as choosing the operating mode and setting the desired
temperature.
9
Ensure that the door is fully closed. If this is not the case, the
external keys will not work.
Cooling mode
The Cooling mode allows starting and using the system to deliv-
er cold and dehumidified air. To activate this function, recom-
mended outdoor temperature should be ranging from +10 °C to
46 °C.
Required ambient temperature available range is between 16 °C
and 30 °C.
•
Activation
— press
Remote control and unit displays show
Set required temperature as follows:
— work
Value is stored with no need to press other buttons.
•
Switch-off
— select another operating mode
Alternatively:
— press
to turn unit off
Heating Mode
The Heating mode allows starting and using the system to de-
liver hot air. To activate this function, recommended outdoor
temperature should be ranging from -25 °C on AMW P , -15 °C on
AMW ST, to 16 °C.
Required ambient temperature available range is between 16 °C
and 30 °C.
11
USE
.