Table of Contents
Advertisement
Troubleshooting guide
The hood does not work
Make sure:
• There is not a power failure.
• A speed has actually been selected.
• The front panel is correctly hooked.
• The 9-pin connection is properly inserted. (Figure 1)
• The red reset button on the electrical system box is pressed. (Figure 2)
• In the 9-pin connection, make sure the wires are properly inserted in
the connector. (When connecting, pressing too hard could bend the
contacts). (Figure 3)
The hood does not extract sufficiently
Make sure:
• The selected speed is sufficient for the quantity of fumes and steam
present.
• There is enough ventilation to allow an air inlet.
• The carbon filter is not worn (Filter version hood).
• The exhaust air outlet pipe is free of obstructions.
• The extraction unit non-return valves are free to rotate. (Figure 4)
The hood stops during operation
Make sure:
• There is not a power failure.
• The differential thermal-magnetic switch (safety cutout) has not tripped.
The lamp does not work
• Check if the lamp needs replacing.
• Make sure the lamp is correctly fitted.
7
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Advertisement
Table of Contents
