Sony BKPF-105A Installation Manual page 6

1-1. Installation of Boards
4. Turn the board levers in the direction of the arrow 1
after inserting the main board to the end of the slot by
hand.
2
1
Board
lever
1
2
Board
lever
5. Stick the slot number label supplied with the board
onto the board lever.
6. Install the board retainers.
7. Install the front panel.
n
When removing the main board, turn the board levers in
the direction of the arrow 2, and pull out the board
toward you.
1-2(E)
1
2
1
2
1Insert
2Remove
Installation of the connector panel
1. Remove the two screws and remove the blank panel
corresponding to the slot which the main board has
been installed.
n
Keep the blank panel which is removed.
B 3x6
Blank panel
2. Insert the connector panel.
3. Secure the connector panel with the two screws
securing the blank panel.
B 3x6
Connector panel
n
Do not open the slot for realizing an air-cooled effect of
PFV-D300. Install the blank panel to an empty slot.
BKPF-105A/205/205R
BKPF-106A/206/206R