Table of Contents
Advertisement
1-4. IInformation of BKPF-205
1-4-5. ISR
The following messages can be sent from the BKPF-205 so as to monitor the operation state of BKPF-
205 by installing the BKPF-205 in a digital video interface unit (PFV-D20/D100A/D200A/D300) togeth-
er with optional ISR (Interactive Status Reporting) interface board BKPF-500.
(For more details, refer to the Operation and Maintenance Manual of BKPF-500.)
Status message (Warning/error information)
Message
Description
NO INPUT
Indicates that no signal is input to the SDI IN connector or that signal input format is not
correct.
NO OUTPUT
Indicates that no signal is output to the SDI OUT connector.
+/_12 V DOWN
Indicates that +12 V or _12 V power is not supplied normally.
AUDIO PLL UNLOCK
Indicates that audio clock is not in synchronization with an SDI signal.
AES/EBU MPX ERROR
Indicates that an audio signal is not be multiplexed with an SDI signal.
Setup message
Message
Status
SDI MODE
D1
D2
525/625
525
625
AUDIO GROUP
GROUP 1
SELECT
GROUP 2
AUDIO MPX
ON
1/2CH
OFF
AUDIO MPX
ON
3/4CH
OFF
AUDIO MUTE
ON
1/2CH
OFF
AUDIO MUTE
ON
3/4CH
OFF
AES/EBU
ON
1/2CH TO 3/4CH
OFF
1-16(E)
Description
Indicates the setting state of a D1/D2 system select switch (S501-1).
Indicates the state of the video system that was discriminated and set by the input
SDI signal.
Indicates the setting state of an audio group select switch (S501-2).
Indicates whether a 1/2 CH audio signal can be multiplexed by setting a inhibit
switch of audio multiplexing (S501-4).
Indicates whether a 3/4 CH audio signal can be multiplexed by setting a inhibit
switch of audio multiplexing (S501-5).
Indicates the setting state of a 1/2 CH digital mute switch (S501-6).
Indicates the setting state of a 3/4 CH digital mute switch (S501-7).
Indicates whether a 1/2 CH audio signal is copied to a 3/4 CH audio signal by setting
a 3/4 OPE switch (S501-8).
BKPF-105A/205/205R
BKPF-106A/206/206R
Advertisement
Table of Contents
