Location And Function Of Switches/Leds - Sony BKPF-105A Installation Manual

A/v multiplexer board, a/v demultiplexer board
Hide thumbs Also See for BKPF-105A:
Table of Contents

Advertisement

1-3-4. Location and Function of Switches/
LEDs
AVD-11 board
1
2
3
4
5
6
1 D351 and D352 : AES/EBU AUDIO DETECT
1
1
1
1
indicators
These indicators indicate the existence of an audio data
in SDI signal. They light in green when the audio data
exists.
D351
Group 1
1/2 CH
Group 2
5/6 CH
Group 3
9/10 CH
Group 4
13/14 CH
2
2 D353 and D354:AUDIO ERROR indicators
2
2
2
These indicators indicate the error of an audio data in
SDI signal. They light in red when the audio data is
not in synchronization with an audio clock.
D353
Group 1
1/2 CH
Group 2
5/6 CH
Group 3
9/10 CH
Group 4
13/14 CH
BKPF-105A/205/205R
BKPF-106A/206/206R
7
8
Component side (A side)
D352
3/4 CH
7/8 CH
11/12 CH
15/16 CH
D354
3/4 CH
7/8 CH
11/12 CH
15/16 CH
3
3
3
3 S202 : Mode set switch (4-poles DIP switch)
3
Factory settings : All "OFF" side
S202-1 : D1/D2 system select switch
This switch selects the system of the video signal.
D1 : 4:2:2 component serial digital video signal.
D2 : 4fsc composite serial digital video signal.
S202-2 and S202-3 : Audio group select
These switches select the group number of the audio
data detected from an SDI signal.
Audio
S202-2
Group
(GP SEL 1)
Group 1
OFF
Group 2
ON
Group 3
OFF
Group 4
ON
Group 1:
The audio data CH 1 through CH 4 in SDI signal
which the DID is set to audio group 1 are detected and
output them as AES/EBU digital audio signal.
Group 2:
The audio data CH 5 through CH 8 in SDI signal
which the DID is set to audio group 2 are detected and
output them as AES/EBU digital audio signal.
Group 3:
The audio data CH 9 through CH 12 in SDI signal
which the DID is set to audio group 3 are detected and
output them as AES/EBU digital audio signal.
Group 4:
The audio data CH 13 through CH 16 in SDI signal
which the DID is set to audio group 4 are detected and
output them as AES/EBU digital audio signal.
The AES/EBU digital audio signal which has no audio
data logically is output when no corresponding audio
data exists in SDI signal .
1-3. Information of BKPF-106A
switches
S202-3
(GP SEL 2)
OFF
OFF
ON
ON
1-9(E)

Advertisement

Table of Contents
loading

Table of Contents