When The Oven Is First Installed - Zanussi ZBP 1165 Instruction Booklet

Zanussi instruction built-in oven zbp 1165
Table of Contents

Advertisement

When the oven is first installed

When the oven is first connected to the electrical supply,
or when supply is restored after a long power failure, the
upper section of the display shows this message:
"WELCOME TO * KRONOS -3 * PYRO * DANSK *
DEUTSCH * ENGLISH * ESPANOL * FRANCAIS *
ITALIANO * NEDERLANDS * NORSK * PORTUGUES *
SVENSKA"
This message lists all the languages which can be chosen
to operate with the Oven Electronic Control (Fig. 1).
Symbol
flashing near the "Clock Symbol"
that you need to set the current time of day before using
the oven.
To set the correct time of day:
1. Touch the "Time Function Control"
flashes near the "Clock Symbol"
current time of day touching controls " " or " " (Fig.
2). Once you have set the time, the symbol
flashing for 5 seconds and then comes off. This
means that the setting has been stored in the
Electronic Control memory.
2. If symbol
stops flashing before you have had time
to set the clock, touch the "Time Function Control"
twice. The symbol
Then, proceed as described at point 1.
To Select the Language
You can choose the language to be used in the Oven
Electronic Control display.
The oven must be OFF when carrying out this operation.
1. Touch the "Cooking Function Control"
"Recipe Selection Control"
keep them pressed for 2 seconds at least. The
Electronic Control beeps once and the display shows
the current language selection (Fig. 3).
2. Within 5 seconds, touch control " " to select your
language (Fig. 4).
3. Once you selected your language, you have 5 seconds
to confirm your selection by touching the "Cooking
Function Control"
Control"
at the same time and keeping them
pressed for 2 seconds at least.
Please note that any time you carry out a step of
this procedure, you have 5 seconds of time to carry
out the following step. If you wait more than 5
seconds the Electronic Control switches off and
the selection is not stored in its memory.
Here follows the list of available languages:
Danish (DANSK), German (DEUTSCH), English
(ENGLISH), Spanish (ESPANOL), French (FRANCAIS),
Italian (ITALIANO), Dutch (NEDERLANDS), Norwegian
(NORSK), Portuguese (PORTUGUES) and Swedish
(SVENSKA).
6
means
. While symbol
, set the
keeps
starts flashing again.
and the
at the same time and
and the "Recipe Selection
Fig. 1
Fig. 2
Fig. 3
Fig. 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents