Zanussi ZBP 1165 Instruction Booklet page 22

How to use the pyrolytic cleaning
function
Before activating the pyrolytic cleaning
function, remove any excessive spillage and
make sure that the oven is empty.
Do not leave anything inside the oven cavity
(e.g. pans, grids, baking tray, dripping pan,
etc.) as this could heavily damage them.
Before activating the pyrolytic cleaning
function, remove the oven shelves and shelf
supports.
To remove the oven shelves and the shelf supports
proceed as follows:
1. keep the shelf support in position with the other hand
(diagram 1);
2. then, disengage the rear hook and take off the shelf
support (diagram 2).
Please, ensure the retaining nuts are secure when
refitting the shelf support.
Ensure that the oven door is closed before
activating the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it is
advisable not to use a hob if it is fitted above
the oven. This could cause overheating and
damage to both appliances.
During the pyrolytic cleaning cycle the oven door
becomes hot. Children should be kept away until
it has cooled.
The following pyro levels are available:
Pyrolytic 1 (PYRO 1) time : 2 h = 30 min heat-up +1 h
at 480°C + 30 min cooling down.
Pyrolytic 2 (PYRO 2) time : 2 h 30 min. = 30 min heat-
up +1 h 30 min at 480°C + 30 min cooling down.
The pyro duration time cannot be changed.
To activate the pyrolytic cleaning function proceed
as follows:
1. Touch control to switch on the oven.
2. Touch control as often as necessary, until the
"Pyro" function symbol
appear on the display (Fig. 25).
3. Touch controls ' ' or '
(PYRO 1) or pyrolytic 2 (PYRO 2) function (Fig. 26).
4. Once you have chosen the desired pyrolytic function,
the "Pyro" writing will flash on the display waiting for
confirmation to start the pyrolytic cleaning function.
5. To confirm which pyrolytic function you desire, touch
control , the "Pyro" text will stop flashing, the oven
lamp will switch off and the pyrolytic cleaning cycle
starts (Fig. 27).
As soon as the oven heats up, the thermometer
symbol rises slowly , indicating that the temperature
inside the oven is increasing.
22
(PYRO 1-level 1) will
' to select the pyrolytic 1
1
2
Fig. 25
Fig. 26
Fig. 27