Zanussi ZBP 1165 Instruction Booklet page 10

To programme the Oven to
switch off
1. Switch the oven on, place food in the oven, select
a cooking function and adjust the cooking tempe-
rature, if required.
2. Touch the "Time Function" control
flashes near the "Cooking Duration" symbol
The time display shows "0.00" at the left hand and
the current time of day at the right hand (Fig. 12).
3. Symbol will flash for 5 seconds. Within this time,
touch control " " to select the required time. Maximum
time is 23 hours 59 minutes. Note that the time
indication on the right hand will also change as you
touch control " ", showing at which time the oven
will automatically switch off (fig. 13).
4. After another 5 seconds after you have set the time,
the symbol stops flashing. This means that the
setting has been stored in the Electronic Control
memory and that the countdown started.
5. When cooking time is over, the oven automatically
switches off. You hear an acoustic alarm while symbol
flashes and the time display shows "0.00".
6. To switch off the acoustic alarm, touch any control.
To cancel the Cooking Duration Time:
Touch time function control
near the "Cooking Duration" symbol
control " " until the time display shows "0.00".
Please note that, if you cancel the "Cooking Duration",
the oven does not switch off.
To programme the Oven to
switch on and off
1. Carry out the "Cooking Duration" setting as
described at points 1 to 4 in the previous chapter.
2. Touch the "Time Function" control
symbol flashes near the "End of Cooking Time"
symbol (Fig. 14).
3. Within 5 seconds, touch control " " to select the
required end of cooking time, which is shown at the
right hand of the time display (Fig. 15).
4. After another 5 seconds after you have set the time,
the symbol stops flashing, the thermometer symbol
comes off, the temperature display shows "30"
and the oven switches off. This means that the setting
has been stored in the Electronic Control memory
and that the countdown started.
5. The oven will switch on and off automatically
according to your settings. When cooking is
completed, you hear an acoustic alarm while both
symbols and
"0.00" at the left hand.
6. To switch off the acoustic alarm, touch any control.
To cancel the programme, simply cancel the
Cooking Duration time as described at the end of
the previous chapter.
10
. The symbol
: the symbol flashes
. Then touch
twice: the
flash. The time display shows
.
Fig. 12
Fig. 13
Fig. 14
Fig. 15