Before The First Use Of The Oven - Zanussi ZBP 1165 Instruction Booklet

Before the first use of the oven

Remove all packaging, both inside and
outside the oven, before using it.
The oven will work only if the time of day has
been set.
To switch the oven on and off
The oven must be switched on before setting any cooking
function or programme. When control
the oven light will switch on. The oven symbol and the
message "LIGHT" appear on the display (Fig. 5).
To switch off the oven, you can touch control
time. Any cooking function or programme will stop, the
oven light will switch off and the time display will show
the time of day only.
Before first use, the oven should be heated without
food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
Ensure the room is well ventilated.
1. Set the time of day with the electronic programmer
(see paragraph "To set the correct time of day").
2. Touch the "ON/OFF" control
oven.
3. Touch the "Cooking Functions" control
select the "Conventional Cooking" function
6).
4. Set the temperature to 250°C using control " " (Fig.
7).
5. Allow the oven to run empty for approximately 45
minutes.
6. Open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking" function and the "Double Grill"
function for approximately 5-10 minutes.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm water to which a little
mild washing-up liquid has been added.
Before cooking for the first time, carefully wash
the oven accessories.
is touched,
at any
to switch on the
twice and
(Fig.
Fig. 5
Fig. 6
Fig. 7
7