Ip-100E Operation Panel Disply - JUKI SC-510 Series Engineer's Manual

(2) IP-100E operation panel display
(Reference) Error is informed by means of the panel display and control box buzzer.
Three different kinds of screens of the panel display screen appear due to the difference of the procedures.
[Warning list (Error display in panel)]
No Contents and display of warning
A201 Replacement of needle warning
A202 Cleaning warning
A203 Replacement of oil warning
1) Error screen disappears when the operator removes
the cause.
Example) Cover of the slot of smart media is open.
2) Press the reset switch, and remove the cause of er-
ror after erasing the error screen.
3) Remove the cause of error after turning OFF the power.
Corrective measure
• Press to close warning screen, and perform
replacement of needle. Then clear the value in
the clear screen.
• Press to clear the value, and perform replacement
of needle.
• Press to close warning screen, and perform
cleaning. Then clear the value in the clear screen.
• Press to clear the value, and perform cleaning.
• Press to close warning screen, and perform
replacement of oil. Then clear the value in the clear
screen.
• Press to clear the value, and perform repla-
cement of oil.
– 119 –
Close the cover.
Remarks
Refer to the sew-
ing management
information in the
i n s t r u c t i o n
m a n u a l f o r
IP100E/SC-510.
Refer to the sew-
ing management
information in the
i n s t r u c t i o n
m a n u a l f o r
IP100E/SC-510.
Refer to the sew-
ing management
information in the
i n s t r u c t i o n
m a n u a l f o r
IP100E/SC-510.