Advertisement
Grease filter
To clean: Soak and then agitate it in a hot water and detergent so-
lution. Light brushing can be used to remove embedded dirt. Rinse,
shake and let it dry before replacing.
NEVER OPERATE THE HOOD WITHOUT THE FILTER IN PLACE.
With careful handling, the metal filter will last for years. If a new re-
placement filter becomes necessary, order the part from your dealer.
charcoal filter—recirculating installations only
The charcoal filter cannot be cleaned. It must be replaced. Order fil-
ter no. WB02X10700.
If the hood is not vented to the outside, the air will be recirculated
through a disposable charcoal filter that helps remove smoke and
odors.
The charcoal filter should be replaced after 6 to 12 months (depend-
ing on hood usage).
To remove: Pull down on the center of the front edge of the filter.
The filter will then slip out of the retaining tabs on the back.
To replace: Slip the back edge of the filter into the retaining tabs
and push the front edge up until it snaps into place.
Replaceable charcoal filter
painted surfaces
Do not use steel-wool pads or other abrasive cleaners. They will
scratch the surface.
Clean grease-laden surfaces of the hood frequently. To clean the
hood surface, use a hot, damp cloth with a mild detergent suitable
for painted surfaces. About one tablespoon of ammonia may be
added to the water. Use a clean, hot, damp cloth to remove soap.
Dry with a dry, clean cloth.
NOTE: When cleaning, take care not to come in contact with filters
and other nonenameled surfaces.
NOTE: DO NOT rinse, or put
charcoal filters in an automatic
dishwasher.
7
Advertisement
