Advertisement
16
2 REMOVE EXHAUST ADAPTOR
If exhausting/venting using the 3 1/4" x 10" rectangular duct.
Remove the exhaust adaptor from the inside of the hood. Set it
aside along with its mounting screws.
3¼” x 10”
rectangular
exhaust
adaptor
and screws
3
REMOVE FILTER
Remove the shipping tape holding the metal grease filter in
place. Pull down on the center of the front edge of the filter.
The filter will then slip out of the retaining tabs on the back.
4
REVERSE THE BAFFLE, FOR DUCTED INSTALLA-
TIONS ONLY
If the hood is to be recirculated, skip to the next step. Remove
the baffle from the top of the hood. Reinstall the baffle so the
short side marked "VENTED" is visible. The long side of the
baffle should be inside the hood.
Metal grease filter
“VENTED” is visible
Advertisement
