Connecting To The Power Supply; Using - TEFAL MULTICOOK & STIR IH Manual

• Given the diverse standards in effect, if the appliance is used in a
country other than that in which it is purchased, have it checked by an
approved service centre.

Connecting to the power supply

• Do not use the appliance if:
− the appliance or the cord is damaged
− the appliance has fallen or shows visible damage or does not work
properly
− In the event of the above, the appliance must be sent to an approved
Service Centre. Do not take the appliance apart yourself.
• Do not leave the cord hanging
• Always plug the appliance into an earthed socket.
• Do not use an extension lead. If you accept liability for doing so, only
use an extension lead which is in good condition, has an earthed plug
and is suited to the power of the appliance.
• Do not unplug the appliance by pulling on the cord.
• Allways disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.

Using

• Use a flat, stable, heat-resistant work surface away from any water
splashes.
• Do not allow the base of the appliance to come into contact with water
• Never try to operate the appliance when the bowl is empty or without
the bowl.
• The cooking function/knob must be allowed to operate freely. Do not
prevent or obstruct the function from automatically changing to the
keep warm function.
• Do not remove the bowl while the appliance is working.
• Do not put the appliance directly onto a hot surface, or any other source
of heat or flame, as it will cause a failure or danger.
• The bowl and the heating plate should be in direct contact. Any object
or food inserted between these two parts would with the correct
operation.
• Do not place the appliance near a heat source or in a hot oven, as
serious damage could result.
• Do not put any food or water into the appliance until the bowl is in
place.
• Respect the levels indicated in the recipes.
EN
9