Fein Dustex 25L Turbo I Manual page 30

Dustex 25L; 35L
7. Assembly
Assembling base plate
2
3
1
1. Place hood (1) on base plate.
2. Fit holder (2).
3. Insert handle (3) into cut-out.
4. Place holder (4) in cut-out.
5. Screw down holder with the three screws (5).
6. Screw down hood with the four screws (6).
C-SC_CSSM Version 1.0
5
4
2015-02-27 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
6
.
Tools:
- Torx T20
(length: 152 mm)
Page 30 of 35