Fein Dustex 25L Turbo I Manual page 21

Dustex 25L; 35L
7. Assembly
Assembling base plate (applies to: Turbo I; Turbo II)
1
2
1. Thread cable with plug into opening (1).
2. Position cable clamping piece (2) and screw down.
3. Wind cable from motor through ferrite sleeve (3) twice.
4. Wind cable of sensor through ferrite sleeve (4) three times.
5. Wind cable of sensor through ferrite sleeve (5) twice.
C-SC_CSSM Version 1.0
3
2015-02-27 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
4
.
5
Tools:
- Torx T15
(length: 89 mm)
Page 21 of 35