Fein Dustex 25L Turbo I Manual page 12

Dustex 25L; 35L
6. Disassembly
Disassembling base plate
1
1. Unscrew sensor (1).
2. Unscrew sensor (2).
3. Remove the two filters (3).
4. Remove ferrite sleeve (4) with cable.
5. Unscrew the seven screws (5) and remove housing.
6. Pull cable (6) off motor.
7. Remove motor (7).
8. Remove motor bearing ring (8).
C-SC_CSSM Version 1.0
3
2
4
2015-02-27 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
5
.
6
7
8
Tools:
- Torx T20
(length: 152 mm)
- Torx T20
(length: 89 mm)
Page 12 of 35