Fein Dustex 25L Turbo I Manual page 26

Dustex 25L; 35L
7. Assembly
Assembling housing
3
2
1. Fit cover (1).
2. Position the two ferrite sleeves (2) in the intended cut-outs.
 There are three ferrite sleeves on Turbo I/ Turbo II in total.
3. Fit filters (3).
4. Screw down housing with the seven screws (4).
C-SC_CSSM Version 1.0
Turbo I/ Turbo II
1
2015-02-27 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
2
4
.
Tools:
- Torx T20
(length: 89 mm)
Page 26 of 35