Installing The Led Luminaire Module - Modern Forms Aviator Flush Installation Instructions Manual

8. Installing the LED Luminaire Module

WARNING:
by turning off the circuit breaker or removing the fuse at fuse box.
NOTE: If you do not plan to install the luminaire module with your
fan at this time, skip this step.
1. Remove the three screws from the LED wire storage cap, keep the
cap for future use when not using the luminaire (Fig. 8).
1. Install the LED mounting plate using 3 screws removed from step
1 (Fig. 8A).
1. Raise and hold the LED luminaire module close to the adapter
plate and proceed to secure the wire connections. Connect the
white wire connector from the luminaire module to the white
wire of the fan. Follow the same procedure with the black wire
connectors (Fig. 8B).
1. Seat the LED luminaire onto LED mounting plate using 3 screws
provided with LED luminaire (Fig 8C).
1. Install glass shade by turning it clockwise until it locks securely
(Fig. 8D).
20 Aviator Flush Instructions
Before starting installation, disconnect the power
F H - W 1 8 1 1