Table of Contents
Advertisement
7. Finishing the Installation
1.
Secure all wire connections with supplied wire ties to assist in fan
installation.
2. Tuck connections neatly into ceiling outlet box.
3. Remove the motor assembly from the hook on the mounting
bracket. Position the motor up to the hanger plate and attach using
two screws through the two key slots in the top of the motor housing
(Fig. 7).
Note: Make sure the receiver sits flat
and does not interfere with the hook.
4. Align the remaining two circular holes on motor housing with the
two holes on the hanger plate. Secure by tightening the two screws.
WARNING:
seated in groove of hanger ball before attaching canopy to bracket.
Failure to properly seat tab in groove could cause damage to electrical
wiring.
18
Aviator Flush Instructions
Make sure tab at bottom of hanger bracket is properly
F H - W 1 8 1 1
Advertisement
Table of Contents
Need help?
Do you have a question about the Aviator Flush and is the answer not in the manual?
Questions and answers