John Shearer Pasture Renovation Drill Operator's Manual page 55

HITCH KIT / HYDRAULICS
ITEM PART No DESCRIPTION
1 46000 HITCH ASSEMBLY
2 46687 TOP LINK
3 46566 ARM AND WHEEL ASSY (LH) – 16"
46813 ARM AND WHEEL ASSY (LH) – 15"
4 46565 ARM AND WHEEL ASSY (RH) – 16"
46812 ARM AND WHEEL ASSY (RH) – 15"
5 44133 3.75x8" HYD CYLINDER
6 44132 3.5 x 8 HYD. CYLINDER
7 34528 BLOCK, BEARING - OUTER
8 46507 PIN, TOP
9 22889 LYNCH PIN
10 17887J1 AS 1110.2 - M16 x 60 -N
11 28912 AS 1112.1 S1 - M16-W-N
12 800-015/2 PIN 26x122
13 43618 PIN, HITCH BOTTOM CAT2
14 HOSE, HYD. - 3/8" (MAIN)
15 HOSE, HYD. - 3/8" (RETURN)
16 HOSE, HYD. - 3/8" (ACROSS)
FOR LINKAGE MACHINES IN PLACE OF RAMS:
17 46960 BAR, TELESCOPIC-OUTER ASSY
18 46959 BAR, TELESCOPIC-INNER ASSY
19 27018 PIN, CLEVIS
QTY
For linkage machines a telescopic link is included in place of
1
1
hydraulic rams. The purpose of these is to adjust the digging depth
1
of the tynes or discs in relation to the wheel. These have up to 9
1
settings in total. For machines with 16 inch wheels, the first 6
1
1
settings are applicable. For machines with 15 inch wheels use
1
settings 4 to 9. The factory setting is shown as shaded.
1
4
3
10
16
16
1
2
1
1
1
2
2
2
47
02.19M143J1