Turning On The Ti-Nspire™ Cx Ii Handheld For The First Time - Texas Instruments TI-Nspire CX II Series Handhelds Manualbook

- Connect to a wall outlet using a TI wall adapter (sold separately in Europe and
Asia).
- If in a classroom setting, place the handheld or multiple handhelds in a TI-
Nspire™ CX Docking Station or a TI-Nspire™ Docking Station.
The TI-Nspire™ CX II handheld has a Deep Sleep feature to maximise battery life
Note:
during extended storage periods. To put the handheld in Deep Sleep mode, press and
hold down the blue reset button on the back of the handheld for at least 4 seconds. To
wake the handheld from Deep Sleep mode, press
USB (computer or wall adapter) or Docking Station power. After waking the handheld,
you can turn it on anytime by pressing
For more information about recharging batteries, see Configuring TI-Nspire™
Note:
Handhelds.
Turning On the TI-Nspire™ CX II Handheld for the First Time
After charging the battery, press
displayed while the operating system loads. Next, choose preferences for language and
font size when prompted.
To turn the handheld off, press
Note:
are retained.
Using Automatic Power Down™
To prolong battery life, the Automatic Power Down™ (APD™) feature turns off the
handheld after three minutes of inactivity. When this happens, press
handheld on and return to the last document or last menu accessed. To change the
default setting, press
change the Power Standby setting.
: For more information about setting up the handheld, see Configuring Handhelds.
Note
Choosing a Language
After the OS is loaded, select a preferred language.
¢
1. Press to open the drop-down list.
c
c
to turn on the handheld. A progress bar is
/ c
c 5 3
to access the Handheld Setup screen where you can
c
for at least 4 seconds or apply
.
. The settings and memory contents
Getting Started with TI-Nspire™ CX II Handhelds
c
to turn the
3