Preparing The Handheld For Use; Turning On The Ti-Nspire™ Handheld For The First Time - Texas Instruments TI-nspire Getting Started

select the option.

Preparing the Handheld for Use

TI-Nspire™ handhelds are shipped with four alkaline AAA batteries and a
standard A male to mini B male USB cable. Handhelds can also be powered
using the TI-Nspire™ Rechargeable Battery or an approved wall charger, which
are sold separately.
Before using the handheld, either install the AAA batteries or install and charge
the TI-Nspire™ Rechargeable Battery (if purchased). You can also connect your
handheld to an external power source if you have the wall charger.
: For more information about installing batteries, see Configuring
Note
Handheld s.
Turning On the TI-Nspire™ Handheld for the First Time
1. Ensure that batteries have been installed or charged, or that the handheld
is connected to a power source.
c
2. Press
A progress bar displays while the operating system loads, and then you
are prompted to choose preferences for language and font size.
To turn the handheld off, press
retained.
Note : For more information about installing and charging batteries, see
Configuring Handhelds .
Using Automatic Power Down™
To prolong battery life, the Automatic Power Down™ (APD™) feature turns off
the handheld after three minutes of inactivity. When this happens, press
to turn the handheld on and return to the last document or menu accessed. To
change the default setting, press
screen where you can change the Power Standby setting.
: For more information about setting up the handheld, see Configuring
Note
Handhelds .
Choosing a Language
After the OS is loaded, select a preferred language.
to turn on the handheld.
/ c
. The settings and memory contents are
c 5 3
Getting Started with the TI-Nspire™ Handheld 9
to access the Handheld Setup
c