Customising Document Settings - Texas Instruments TI-Nspire CX II Series Handhelds Manualbook

- When you turn the handheld on again, the system reboots and opens saved
work.
• Pointer speed (slow, normal or fast).
• Auto dim (30, 60 or 90 seconds and two or five minutes).
• Enable tapping to click.
Changing Handheld Setup Options
1. From the Home screen, press
The Handheld Setup dialogue box opens.
e
2. Press until the desired category is highlighted.
¢
3. Press to view the list of possible settings.
¤
4. Press to highlight the desired setting.
x ·
5. Press or
6. When you have changed all the settings to suit your needs, press
highlighted, then press

Customising Document Settings

Document settings control how the handheld displays and interprets information in TI-
Nspire™ documents and in Scratchpad. All numbers, including elements of matrices
and lists, are displayed according to the document settings. You can change the default
settings at anytime and you can also specify settings for a particular document.
Document settings and their possible values are listed in the following table.
5 3
to select the new setting.
x ·
or to apply your changes.
( Settings > Handheld Setup ).
e
until OK is
Configuring Handhelds 63