Texas Instruments TI-Nspire CX II Series Handhelds Manualbook page 39

1
2. Press to select the custom split option.
The standard layout is displayed with a divider between the application panes. Use
the arrows (
£ ¤ ¡
3. Press , ,
the layout.
+ -
4. Press or
-
• Pressing
+
• Pressing
-
Press to go back to a vertical layout.
+
• Pressing
enables you to choose between a vertical and horizontal page layout with three
panes.
+
• Pressing
through the previous layout options.
) in the middle of the divider to adjust the size of the panes.
¢
or to move the divider to adjust the height or width of the panes in
to select a defined layout:
returns to a full page layout.
once switches layout from a vertical layout to a horizontal layout.
twice adds a third pane to the page. Pressing
five times adds a fourth pane to the page. Press
Working with Documents on TI-Nspire™ CX II Handhelds
+
multiple times
-
to cycle
33