Advertisement
Welcome to your new EVO 8 Audio Interface. Please read this quick guide to help get you started.
Connect
To connect your EVO 8 to your computer, simply
01
plug in the USB cable provided. Once successfully
connected, EVO 8's volume wheel LED's will
illuminate and perform a short animation followed
by the Volume button illuminating.
The Features
Channels 1, 2, 3 & 4
03
Phantom Power (for condenser microphones)
Volume knob
Output 1 Volume Button
Output 2 Volume Button
2
1
3
Install Drivers
In order to start using your EVO 8 you will need to
02
download and install the latest drivers, which can be
found at evo.audio/evo8/downloads. Once the drivers
are installed, you may be prompted to update the unit's
firmware. A full installation guide and user manual can
also be found on our website.
Additional Notes
Phantom Power - in order to use 4 channels of phantom
power simultaneously, a USB C-C connection must
be used. If you are using a USB A connection you will
only be able to use 2 channels of phantom power
simultaneously.
4
5
6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Audient EVO 8
Summary of Contents for Audient EVO 8
- Page 1 Welcome to your new EVO 8 Audio Interface. Please read this quick guide to help get you started. Install Drivers Connect To connect your EVO 8 to your computer, simply In order to start using your EVO 8 you will need to plug in the USB cable provided.
- Page 2 Smartgain Mode The Smartgain LED will start flashing red and the volume wheel LED’s will illuminate Press the Smartgain button to begin indicating that Smartgain Mode is now listening The Smartgain LED will illuminate green and the input channel LED’s (1, 2, 3 & 4) Start playing or performing into the will begin to flash (indicating a channel microphone...
Need help?
Do you have a question about the EVO 8 and is the answer not in the manual?
Questions and answers