Advertisement
Quick Links
Connect
To connect your EVO 4 to your computer,
01
simply plug in the USB cable provided. Once
successfully connected, EVO 4's volume
wheel LEDs will illuminate and perform a
short animation followed by the Volume
button illuminating.
The Features
1.
Smartgain Mode
03
2.
Inputs 1 + 2
3.
Phantom Power
4.
Volume knob
5.
Monitor Mix
6.
Output volume
Welcome to your new EVO 4 Audio Interface. Please
read this quick guide to help get you started.
3
2
1
Install Drivers
In order to start using your EVO 4 you will need
02
to download and install the latest drivers, which
can be found at evo.audio/evo4/downloads.
Once the drivers are installed, you may be
prompted to update the units firmware. A full
installation guide can be found on our website.
4
5
6
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Audient EVO 4
Summary of Contents for Audient EVO 4
- Page 1 Connect Install Drivers To connect your EVO 4 to your computer, In order to start using your EVO 4 you will need simply plug in the USB cable provided. Once to download and install the latest drivers, which successfully connected, EVO 4’s volume can be found at evo.audio/evo4/downloads.
- Page 2 Smartgain Mode The Smartgain LED will start flashing red and the volume wheel LED’s will Press the Smartgain button to begin illuminate indicating that Smartgain Mode is now listening The Smartgain LED will illuminate green and the input channel LEDs (1 & 2) will Start playing or performing into the begin to flash (indicating a channel microphone...
Need help?
Do you have a question about the EVO 4 and is the answer not in the manual?
Questions and answers