PowerBox Systems iGyro SAT Instruction Manual page 4

- Set up the iGyro in flight using the Gain control
- Fine-tune the individual axes if necessary
- Assign the established gain value to a switch
b) Test-flown model
- Assign the gyro outputs
- Set the installed position
- Establish the centre and end-points
- Set up the iGyro in flight using the Gain control
- Fine-tune the individual axes if necessary
- Assign the established gain value to a switch
As you can see, no adjustments of any kind are required at the iGyro SAT or the
receiver in order to carry out the basic model set-up, or to test-fly the model with
the gyro disabled. For this reason we start the set-up process with the assignment
of gyro channels in the Telemetry menu:
3.1. SETTING UP A TELEMETRY WIDGET
The first step - if you have not already done so - is to set up a Telemetry widget for
the receiver. This widget provides access to the receiver's Telemetry menu:
4 PowerBox-Systems − World Leaders in RC Power Supply Systems