Additional Features - PowerBox Systems iGyro SAT Instruction Manual

Hide thumbs Also See for iGyro SAT:

Table of Contents

Select the axis to be adjusted at Axis Selection, then the desired range at Range

Selection. The two ranges can be used to enter two different settings, which you

can then select in flight using a switch. Range A is selected for gain values of 0%

to +100%, while Range B applies to 0% to -100%. In all cases the iGyro is disabled

at 0%.

For example, you can set up two ranges: one range with Attitude Assist and a se-

cond without Attitude Assist; you can then switch between them in flight.

3.7. ADDITIONAL FEATURES

The default settings of the iGyro in the receiver are ideal for the vast majority of

pilots. Nevertheless, we have incorporated a range of Expert functions in order to

cover all possible applications.

- Attitude Assist:

We selected the term Attitude Assist because the iGyro's "heading" mode differs

significantly from the Hold modes of other manufacturers. Attitude Assist can even

be used with complete safety on elevator, without risking an unwanted stall, as it is

only active at the centre position of the stick. As soon as the stick is moved, Attitu-

de Assist is disabled, and the model's control 'feel' remains exactly as normal. By

default Attitude Assist is active on Aileron in Range B.

- Gyro characteristic:

This value can be used to harden or soften the regulatory characteristics of the

iGyro. If the model is clearly self-correcting when flying in gusty conditions, alter the

value in the direction of Soft; on the other hand, if you think that the iGyro responds

too slowly to gusts, alter the value in the direction of Ultra.

PowerBox-Systems − World Leaders in RC Power Supply Systems

Table of Contents