Zanussi 311608901 Instruction Booklet page 40

TO REMOVE THE OUTER GLASS
1. Open the oven door slightly to gain access to the
two cross head screws on the top of the oven
door.
2. Loosen the two screws using a Pozidrive
screwdriver.
3. Hold the door glass securely in place with one
hand remove the screws and washers with the
other hand.
The screws and washers retain the trim on the top
of the door. Note the position of the trim on the
door.
4. Holding the door and glass with one hand, gently
pull towards you and slightly lift the door glass
with the other hand to disengage the panel from
the location point at the bottom of the door.
Gently release the door to close it.
5. Clean the outer and inner glass using hot soapy
water or Hob Brite. Should the inner face of the
outer door glass
recommended that soapy water with a high
concentration of soap is used.
streaking a glass cleaning spray may be applied
and the glass polished with a soft cloth. Ensure
that all parts are thoroughly dry before attempting
to replace the outer door glass.
6. DO NOT use abrasive cleaning materials or
scourers on the outside of the appliance as
damage will occur.
Stainless Steel cream cleaners are abrasive
and should be avoided as they may dull the
surface finish.
To prevent streaking on stainless steel models
finish with a soft cloth.
If the door glass panel becomes chipped or
has deep scratches the glass will be
weakened and must be replaced to prevent
the possibility of the panel shattering.
Please contact your local Service Force
Centre who will be pleased to advise
further.
be heavily soiled
To prevent
it is
40
Grill Door Trim