Download Print this page

Zanussi ZBF 760 Operating And Installation Manual

Zanussi operating and installation manual built-in oven zbf 760
Hide thumbs


ZBF 760



  Related Manuals for Zanussi ZBF 760

  Summary of Contents for Zanussi ZBF 760

  • Page 2: Important Safety Information

    • You must not attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Zanussi Service Force Centre. Always insist on genuine Zanussi spare parts. Disposal of an old appliance •...
  • Page 3: Table Of Contents

    For the User Important safety information Description of the appliance Controls The Electronic Timer Page 7 Before the First Use Using the Fan Oven Cooking Chart Defrosting Grilling Cleaning the Oven What happens if something goes wrong Service and Spare Parts Peace of Mind for 24 months Guide to Use the instructions...
  • Page 4: Description Of The Appliance

    Description of the Appliance Electronic timer TIMER Grill Element Rating Plate Removable handle Grill / Roasting pan Oven Function Thermostat Control Control Light Knob Grill Pan Grid Thermostat Control Knob Oven Light Grease Filter Anti-tip shelf (x 2)
  • Page 5: Controls

    Controls Oven Function Control Knob Oven Light - The oven light will be on without any cooking function. Defrost Setting - This setting is intended to assist in thawing of frozen food (see page 13). Fan ducted cooking - This allows you to roast or roast and bake simoultaneously using any shelf, without flavour transference.
  • Page 6: The Electronic Timer

    The Electronic Timer The electronic timer can indicate the time of day, operate as a minute minder and automatically operate the oven. Before the oven can be operated, the time of day must be set on the electronic timer. Please note that this is a 24 hour clock. For example, 2pm is shown as 14:00.
  • Page 7 MANUAL FUNCTION Press button to set the oven for manual function. TO SET THE TIMER TO SWITCH OFF ONLY This is useful if you want to begin cooking immediately but have the oven switch off automatically. 1. Set the oven function control knob and the thermostat control knob on the required settings.
  • Page 8: Before The First Use

    Before the First Use Remove all packaging, both inside and outside the oven, before using the appliance. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1.
  • Page 9 The oven has four shelf levels, and is supplied with two anti-tip shelves. It is important that these shelves are correctly positioned as shown in the diagram. How to Use the Fan Oven 1. Turn the oven function control knob to 2.
  • Page 10: Cooking Chart

    Cooking Chart This chart is intended as a guide only. It may be necessary to increase or decrease the temperature to suit your individual requirements. Only experience will enable you to determine the correct setting for your personal requirements. Food Biscuits Bread Casseroles...
  • Page 11 Hints and Tips Runner positions are not critical, but make sure the shelves are evenly spread. When cooking more than one dish in the fan oven, place dishes centrally on the shelves rather than several dishes on one shelf. When the oven is full, you may need to allow slightly longer cooking time.
  • Page 12: Defrosting

    Defrosting The oven fan operates without heat and circulates the air, at room temperature, inside the oven. This increases the speed of defrosting. However, please note that the temperature of the kitchen will influence the speed of defrosting. This function is particularly suitable for delicate food which could be damaged by heat, e.g.
  • Page 13: Grilling

    Grilling Grilling must be carried out with the oven door closed. The grill pan handle must be removed from the pan. How to Use the Grill 1. Turn the oven control function knob on 2. Turn the thermostat control knob on the required temperature.
  • Page 14: Cleaning The Oven

    Cleaning the Oven Before cleaning always allow the cooling fan to cool the cooker down before switching off at the electricity supply. The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Cleaning materials Before using any cleaning materials on your oven, check that they are suitable and that their use is...
  • Page 15 Oven Cavity The enamelled oven cavity is best cleaned whilst the oven is still warm. Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
  • Page 16: Replacing The Oven Light

    - Electric rate: 220-240 V (50 Hz), - Resistant to temperatures of 300 C, - Connection type: E14. These bulbs are available from your local Zanussi Force Service Centre. To replace the faulty bulb: 1. Ensure the oven is isolated from the electrical supply.
  • Page 17: If Something Goes Wrong

    The timer does not work The oven fan is noisy If after all these checks, the oven still does not work, contact your local Zanussi Service Force Centre quoting your model and serial number, which can be found on the rating plate.
  • Page 18: Service And Spare Parts

    We, Zanussi Ltd., undertake that, if, within twenty four months of the date of the purchase, this ZANUSSI appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our...
  • Page 19: Technical Data

    For Uk use only Models Rating Cable cross section mm Type of the cable ZBF 760 2570 W 6 mm 6242 Y For Europe use only Models Rating Cable cross section mm...
  • Page 20: Installation

    Installation The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician/competent person, in accordance with existing rules and regulations. It is dangerous to alter the specifications or modify the appliance in any way. Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.