Table of Contents
Advertisement
6. Setting up ML Touch
ML Touch is an iPad application used by instructors to operate the entire system. It can be downloaded
from the App Store.
This describes the setup operations that must be performed before the application can be used.
For details on using ML Touch, refer to the ML Touch User's Guide.
6-1. Download ML Touch from the App Store.
6-2. Tap the ML Touch icon to start the application.
The initial setup window appears.
Then, if there are no problems, the Home window appears. If an error appears, check the following.
• Are the MLA-200s connected correctly and are there no duplicate Unit IDs?
If an error appeared, the Home window does not appear. Exit ML Touch, and then start it again.
If the iPad is not connected via Wi-Fi make settings in iOS. Refer to Step 7 in the Quick Setup Guide.
This completes the setup of ML Touch.
MLC-200 Installation Guide – 15
Advertisement
Table of Contents
