Table of Contents
Advertisement
9. Installing onto an instrument — continued
Mounted with screws on the side
15 mm or more
Use this installation method when the instrument stand is toward the back of the keyboard.
As described in "Installation precautions (attaching to the instrument with included screws)" (Page 20),
maintain a distance of 15 mm or more between the center screw and the edge of the stand, and install by
using all four screws.
Mounted with screws at the bottom
15 mm or more
If the instrument has a thin stand, mount the MLA-200 with the screws at the top, or at the bottom using this installation
method. With this method, also maintain a distance of 15 mm or more between the center screw and the edge of the
stand, and install by using all four screws, as described in "Installation precautions (attaching to the instrument with
included screws)" (Page 20).
MLC-200 Installation Guide – 21
Advertisement
Table of Contents
