Table Of Contents; User Interface - Kanmor 360e Data Brochure

How To Use The Data Brochure
This brochure is organized into four main sections. They are: 1) Sequence of Operation, 2) Installation, 3) Control Settings, and
4) Troubleshooting. The Sequence of Operation section has three sub-sections. We recommend reading Section A: General
Operation of the Sequence of Operation, as this contains important information on the overall operation of the control. Then
read the sub-sections that apply to your installation. For quick installation and setup of the control, refer to the Installation sec-
tion, DIP Switch Settings section, followed by the Quick Setup section.
The Control Settings section (starting at DIP Switch Settings) of this brochure describes the various items that are adjusted and
displayed by the control. The control functions of each adjustable item are described in the Sequence of Operation.

Table of Contents

User Interface..................................................Pg 2
Description of Display Elements ..................Pg 3
Sequence of Operation ..................................Pg 4
Section A: General Operation ..............Pg 4
Section B: Mixing ..................................Pg 5
Section C: Boiler Operation .................Pg 8
Installation.......................................................Pg 10
Electrical Connections..........................Pg 10
Testing The Wiring.................................Pg 12
Cleaning...........................................................Pg 13

User Interface

The 360e uses a Liquid Crystal Display (LCD) as the method of supplying information. You use the LCD in order to set up and
monitor the operation of your system. The 360e has three push buttons (Item,
As you program your control, record your settings in the ADJUST menu table which is found in the second half of this brochure.
Item
The abbreviated name of the selected item will be displayed in the item field of the
display. To view the next available item, press and release the Item button. Once
you have reached the last available item, pressing and releasing the Item button will
return the display to the first item.
Adjust
To make an adjustment to a setting in the control, press and hold simultaneously for
1 second the Item,
in the top right corner. Then select the desired item using the Item button. Finally
use the and/or button to make the adjustment.
To exit the ADJUST menu, either select the ESC item and press the
When the Item button is pressed and held in the VIEW menu, the display scrolls through all the adjust items in both access levels.
Additional information can be gained by observing the status field and pointers of the LCD. The status field will indicate which
of the control's outputs are currently active. Most symbols in the status field are only visible when the VIEW menu is selected.
© 2003 D 360e - 06/03
and buttons. The display will then show the word ADJUST
DIP Switch Settings........................................Pg 13
Quick Setup.....................................................Pg 14
Control Settings..............................................Pg 15
View Menu ..............................................Pg 15
Adjust Menu ...........................................Pg 16
Testing and Troubleshooting ........................Pg 17
Error Messages......................................Pg 19
Technical Data ................................................Pg 20
Limited Warranty ............................................Pg 20
, ) for selecting, viewing, and adjusting settings.
or button, or leave the adjustment buttons alone for 20 seconds.
2 of 20
Item
Item