Air Filter; Lift Front Wheel; Handlebar Height Adjustment; Tilling Depth Adjustment - Hyundai HYT150 Instruction Manual

Preparing The Tiller

Air Filter

STEP 1
Check air filter (25) for dust, dirt or
obstruction of elements.

Lift Front Wheel

STEP 1
Pull the front wheel bracket out of the locating
notch, swing the bracket down (the spring will
pull the bracket back into the notch).
The tiller can stand with no other support.
STEP 2
With the wheel in the lower position the tiller
can be wheeled into position, lift the
handlebars up with the front wheel on the
ground, the bladed can be lifted off the
ground for travelling. When the tiller is
positioned and ready to use, the front wheel
can be lifted into the raised position.

Handlebar Height Adjustment

!
CAUTION! Before adjusting the handlebar,
place the tiller on firm level ground.
STEP 1
To adjust the tiller handle height, loosen the
adjuster bolts (16) on either side, select the
appropriate height and tighten the bolt.

Tilling Depth Adjustment

STEP 1
First attach the height bar (18) into the height
bar holder, slide through to the required
height and then lock the bar with the R-type
locking pin.
19