Assembly
!
You must read the assembly safety on
the previous page before you begin.
Attaching The Handles
STEP 1
Slide the handle bracket (25) onto the ends
of the handles. Attach the handle bars to the
handle bar support with bolts only finger tight
to the lower position as shown.
STEP 2
Swing the handles up, and slide the bracket
(25) down onto the handle support. Insert
centre bolt and tighten.
16
STEP 3
Insert the bolts through the upper holes.
Tighten all bolts.
Attaching The Cable Clips
STEP 1
Attach the cables onto the handles using the
clips (22) provided.