Assembly
Attaching The Depth Bar
STEP 1
Attach the depth bar (18) to the depth bar
holder, choose a suitable height and then lock
the depth bar with the large R shaped-pin
(26).
Attaching Blades
STEP 1
Slide a blade (24.1) onto the end of the
other blades shaft insert and secure with a
R-type locking pin (24.2).
STEP 2
Slide the outer blade (24.3) into the outer
blade hole, insert pin and secure with another
R-type locking pin. Attach the blade to the
opposite side of the rotavator shaft using the
same method.
Attaching The Mud Guard
STEP 1
Attach the mud guard (23) to both sides with
the nuts and bolts supplied and tighten.
17