Operating Sequence - Zanussi ZDC37100W User Manual

Operating sequence

1. Load The Laundry
Connect the appliance. Open the door
(see picture).
Place the laundry in the drum, one
item at a time, shaking them out as
much as possible. Close the door.
Please check the laundry does not get
caught between the door and filter.
2. Select The Required Time.
Turn the programme selector dial to
At the end of the programme the selec-
tor dial must be turned to position Off,
to switch the machine off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the lights of the
programme progress display start to
flash. The machine will not perform the
new selected programme.
10
the required pro-
gramme. The light
Start/Pause starts to
flash.
Turn the dial to the
required time.
The lights Drying,
and End come on.
3. Programme Option Buttons
Depending on the programme, different
functions can be combined. These
must be selected after choosing the
desired programme and before
depressing the Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Delicate Button
.
Delicate is only suitable for use with
loads of up to 3kg!
When the programme has finished the
pilot lights End is on.
Textile Button
Cotton: to be used for cotton, .
Synthetics to be used for synthetic or
delicate items.
When the programme has finished the
pilot lights End /Anticrease is on.
Pressing this button
allows drying to be
performed at a lower
temperature, for del-
icate items.
The corresponding
pilot light comes on.
Press the Textile
button repeatedly, to
select the desired
option. The relevant
light will light up.
You can select 2 dif-
ferent options: