Operating Sequence; Useful Hints - Zanussi TD 4213 Instruction Booklet

Operating sequence

Before starting up for the first time it is advisable lo
load a few moist cloths into the dryer and to let it run
for about 20 minutes. This ensures that no dust and
dirt is left in the drum.
1. Load the laundry
Open the door.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught
between the door and filter.
2. Depress button
3. Select the drying time
Turn the selector dial clockwise to the desired time,
in the high or low temperature section, depending on
the laundry.
4. Start the machine
Depress Start-button , the mains-on light comes
on and the machine starts operating.
,if required
5. When drying is completed
The machine stops automatically. The selector dial is
on "O", the mains-on light is off.
If the laundry is still too damp, select a further brief
drying time, bearing in mind that during the last 10
minutes the dryer carries out the cooling and anti-
crease treatment phase.
Clean the filters after every drying programme
(see page 13).
This will ensure correct functioning of the
appliance.

Useful hints

• Try to load to the maximum capacity of the
machine as small loads are uneconomical.
For information, here is a list of the average
weights of some common laundry items.
Sheet
Tablecloth
Kitchen towel
Table napkin
Towelling hand towel
Bathrobe
Man's shirt
Pillowcase
Man's pyjamas
Ladies' nightdress
• Never tumble dry the following:
Particularly delicate items such as net curtains,
woollen, silk, fabrics with metal trim, nylon tights,
bulky materials such as anoraks, blankets,
eiderdowns, sleeping bags, feather quilts and any
items containing rubber foam or materials similar to
rubber foam.
9
700 - 1000 g
400 - 500 g
70 - 120 g
50 - 100 g
150 - 250 g
1000 - 1500 g
200 - 300 g
100 - 200 g
400 - 500 g
200 - 250 g