Operating Sequence - Zanussi TC 7122 User Manual

Operating sequence

Before using your tumble dryer for the first time, we
recommend to place a few damp cloths inside the
appliance and dry for 20 minutes.
There may be dust inside a brand new tumble dryer.
Drying
1. Connect the appliance.
2. Open the door.
3. Load the items one at a time, shaking them out
loosely.
4. Close the door. Please check the laundry does
not get caught between the door and filter.
5. Select the drying time.
6. If required, press the Low Temperature button
7. Press the Start button
illuminates and the machine starts operating.
The drum turns alternately in both directions
during drying.
All drying programmes end with a 10 minute
cooling phase (position
The machine stops automatically at the end of
this phase. The mains-on light goes off.
8. Remove the laundry.
.
, the MAINS-ON light
on selector dial).
9
After each use
• Clean the filters (see page 11).
• Empty the water reservoir (see page 12).
Important!
If the drying programme has to be stopped before it
reaches the end, we recommend that you turn the
time selector dial to position
until the end of this phase before removing the
laundry. This will avoid a build-up of heat inside the
appliance.
Modifying the programme
To change a programme which is running without
opening the door, simply turn the time selector dial
to the required time.
(cooling) and wait