Zanussi ZDC37100W User Manual page 22

Door reversal
To make it easier to load or unload the
laundry the door can be reversed.
Important:
Reversing the door is not possible if
after this operation the appliance result
installed behind a door with a hinge on
the opposite side to that of the
appliance.
This operation must be carried out by
qualified personnel. Please contact the
nearest Service Centre.
Electrical connection
This machine is designed to operate on
a 230 - 240 V, single-phase, 50 Hz
supply. Check that your domestic
electrical installation can take the
maximum load required (2.35 kW), also
taking into account any other appliances
in use.
Connect the machine to an earthed
socket, in accordance with current wiring
regulations.
Important:
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precaution. Should the
appliance power supply cable need to
be replaced, this must be carried out
by our Service Centre.
Important:
The power supply cable must be
accessible after installing the
machine..
22
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the appliance's rating
plate. (See picture on page 5).
The appliance is supplied with a 13amp
plug fitted.
In the event of having to change the fuse
in the plug supplied, a 13amp ASTA
approved (BS1362) fuse must be used.
Should the plug need to be replaced for
any reason, proceed as described below.
The wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow
Blue
Brown
The wire coloured green and yellow must
be connected to the terminal marked
with the letter «E» or by the earth symbol
or coloured green and yellow.
The wire coloured green and yellow must
be connected to the terminal marked
with the letter «E» or by the earth symbol
or coloured green and yellow.
WARNING:
A cut off plug inserted into a 13 amp
socket is a serious safety (shock)
hazard.
Ensure that the cut off plug is disposed
of safely.
- Earth
- Neutral
- Live