PASCO PS-3516 Instruction Sheet

Ammonium ise probe

Table of Contents

Download this manual

Ammonium ISE Probe

Cotton

Included Equipment

Ammonium ISE Replacement Module

Ammonium ISE (NH

) Probe

Storage Bottle

BNC Male-to-Female Cable

PS-3516

*DO NOT

let the BNC

connector

at the top of

the unit get

wet.

Reference

Chamber

Item

Included Equipment

Ammonium Standard Solution 1000 ppm

Ammonium Reference Fill Solution

Ammonium Ionic Strength Adjuster (ISA)

Maximum immersion depth*

I n s t r u c t i o n S h e e t

012-15718A

Item

Table of Contents

Do you have a question about the PS-3516 and is the answer not in the manual?

Page 1 I n s t r u c t i o n S h e e t 012-15718A Ammonium ISE Probe PS-3516 *DO NOT let the BNC connector at the top of the unit get wet. Reference Chamber Cotton Included Equipment...
Page 2 2. Thoroughly rinse the electrode with distilled water. Wipe carefully with a clean lab wipe. • PASPORT High Precision pH/Temperature with ISE/ORP Amplifier (PS-2147) with a PASCO 3. Return the electrode to the storage bottle when it is interface (see www.pasco.com for information) not in use.
Page 3 If the electrode slope is still outside the normal range after this procedure, you must replace the sensing Software Help module. See the SPARKvue Help or PASCO Capstone Help for Reading a Sample with the Electrode information about collecting, displaying, and analyzing data.
Page 4 Email: Short Term (over night or the weekend): Limited Warranty For a description of the product warranty, see the PASCO catalog. Rinse the electrode thoroughly with Dl water and place Copyright the tip in a diluted standard solution between This PASCO scientific instruction sheet is copyrighted with all rights measurements.
Page 5 For more information visit www.pasco.com/legal. Product End of Life Disposal Instructions: This electronic product is subject to disposal and recycling regulations that vary by country and region.