PASCO PS-3519 Instruction Sheet

Chloride ise probe

Table of Contents

Download this manual

Cotton

Included Equipment

Chloride ISE Replacement Module

Chloride ISE (Cl

) Probe

Storage Bottle

BNC Male-to-Female Cable

Chloride ISE Probe

PS-3519

*DO NOT

let the BNC

connector

at the top of

the unit get

wet.

Reference

Chamber

Item

Included Equipment

Chloride Standard Solution 1000 ppm

Chloride Reference Fill Solution

Chloride Ionic Strength Adjuster (ISA)

Solid State ISE Polishing Strips (2)

I n s t r u c t i o n S h e e t

012-15721A

Item

Table of Contents

Do you have a question about the PS-3519 and is the answer not in the manual?

Page 1 I n s t r u c t i o n S h e e t 012-15721A Chloride ISE Probe PS-3519 *DO NOT let the BNC connector at the top of the unit get wet. Reference Chamber Cotton Included Equipment...
Page 2 Wipe carefully with a clean lab wipe. • PASPORT High Precision pH/Temperature with 3. Return the electrode to the storage bottle when it is ISE/ORP Amplifier (PS-2107) with a PASCO not in use. interface (see www.pasco.com for information) Fill the Electrode with Electrolyte The reference (outer) chamber must be filled with •...
Page 3 Software Help a white ceramic pin on the inner body. See the SPARKvue Help or PASCO Capstone Help for If the electrode slope is still outside the normal range information about collecting, displaying, and analyzing after this procedure, you must replace the sensing data.
Page 4 Limited Warranty For a description of the product warranty, see the PASCO catalog. 5. Pipette 100 mL of sample into a 150 mL beaker. Add Copyright 2 mL of ISA. Stir thoroughly.
Page 5 P S - 3 5 1 9 Technical Support The European Union WEEE (Waste Electronic and Electrical Equipment) symbol (to the right) and on the product or its packaging indicates that this product must not be disposed of in a standard waste container.