Surround Play - Kenwood VR-716 Instruction Manual

Ambience effects

Surround play

The DTS compatible models can reproduce a CD, DVD, or LD carrying the
DTS mark.
DOLBY DIGITAL can be used w hen playing DVD or LD softw are bearing
the mark and DOLBY DIGITAL format digital broadcasts (etc.).
DOLBY PRO LOGIC can be used w hen playing video, DVD, or LD
softw are bearing the
LISTEN MODE
INPUT MODE
Input
Selector
Input Mode
Listen Mode
Preparations
• Turn ON related components.
• Complete " Preparing for surround sound" (speaker settings).
• Use the INPUT SELECTOR to select the component you w ish to play
back w ith surround sound.
• Use the INPUT M ODE key to select the input mode (analog or digital)
for the source you w ish to play back.
• Noise w ill be produced w hen a DTS source is played by selecting the
analog input.
1
Start playing the video softw are.
2
Press the LISTEN M ODE key to select the listening mode.
The listening mode settings are stored separately for each input. If the
input mode is set to full auto (" AUTO DETECT " lights), the receiver
selects the optimal listening mode automatically based on the type of
input signal and the speaker settings.
Each press of the LISTEN M ODE key sw itches the setting as
listed.
The listening mode settings are different depending on the type
of input signal.
mark.
INPUT SELECTOR
+ +
¢
4
+
W hen the DOLBY DIGITAL signal is input:
(The DOLBY DIGITAL, PRO LOGIC, or STEREO indicator lights up.)
1 DOLBY DIGITAL : DOLBY DIGITAL surround.
2 PL II M OVIE
3 PL II M USIC
4 PRO LOGIC
5 STEREO
When you select DOLBY DIGITAL
" DOLBY DIGITAL" w ill scroll from right to left.
W hen the DTS signal is input:
(The DTS LED indicator lights up.)
1 DTS
2 STEREO : Normal stereo playback
W hen the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input:
1 PL II M OVIE : PRO LOGIC II surround M OVIE m ode.
2 PL II M USIC : PRO LOGIC II surround M USIC m ode.
3 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.
^
4 ARENA
5 JAZZ CLUB : DSP Surround JAZZ CLUB mode.
6 THEATER
7 STADIUM
8
8 DISCO
9 STEREO
• Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using the receiver's current
settings is input, dow nmixing is performed to match the number of
available channels.
3
Adjust the volume.
Notes
• Depending on the type of the signal or speaker setting, some
listening modes cannot be selected.
• When playback is started, the sound may be cut or interrupted
before the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as w ell as all the other listening
modes) from a single component, be sure to use a Dolby Digital
compatible source component.
(The DOLBY DIGITAL LED indicator lights
up.)
: PRO LOGIC II surround M OVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround M USIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
: Normal stereo playback.
(The STEREO indicator lights up)
: DTS surround
(The PRO LOGIC indicator lights up.)
(The PRO LOGIC indicator lights up.)
(The PRO LOGIC indicator lights up.)
: DSP Surround ARENA mode.
: DSP Surround THEATER mode.
: DSP Surround STADIUM mode.
: DSP Surround DISCO mode.
: Normal stereo playback.
(The STEREO indicator lights up.)
25 EN