Table of Contents
Advertisement
TROUBLESHOOTING
Always check the message display whenever the copier stops or
operation is not possible. The messages will give you easy-to-
follow directions. If the messages do not give specific instruc-
tions, check the list below.
Copier does not operate.
Copies are too dark or too light.
Blank copies.
Copies smear if rubbed.
Downloaded from:
http://www.usersmanualguide.com/
Problem
I
I
Copier plugged in?
Power switch on?
Power up timer mode is set.
Copy density properly adjusted?
Is the original placed face
down?
Paper too heavy?
Paper damp?
Solution
Plug the copier into a grounded
outlet.
Turn the power switch on.
Turn the power switch off, then
on again.
See page 20.
Place the original face down.
Use copy paper within the speci-
fied range. See page 48.
Replace with dry copy paper. Be
sure to store copy paper in a dry
location.
65
Advertisement
Table of Contents
