Table of Contents
Advertisement
Downloaded from:
http://www.usersmanualguide.com/
I
I
Load it onto the feed table.
4
Be sure to load paper appropriate for paper tray 1. See the
table above.
Do not exceed the maximum height line.
Push the paper tray back into the copier.
5
The release button lamp will blink as the feed table returns to
the feed position and will light steadily when it is in position to
feed.
Loading paper in paper trays 2 and 3
Press the release button on the paper tray.
1
The release button lamp will blink while the feed table is lower-
ing and will go out when the tray is ready to be opened.
When the release button lamp goes out, pull out the
2
paper tray.
Do not pull out the paper tray before the release button lamp
goes out.
Fan the copy paper and load it along the right side of
3
the feed table.
Be sure to load paper appropriate for that paper tray. See the
table on page 48.
Do not exceed the maximum height line.
Adjust the paper guides to the width and length of the
4
paper.
Push the paper tray back into the copier.
5
The release button lamp will blink as the feed table returns to
the feed position and will light steadily when it is in position to
feed.
PAPER
49
Advertisement
Table of Contents
