Yamaha MODX6 Supplementary Manual page 14

Roll
This Job creates a series of repeated notes (like a drum roll) over the specified range.
[R] (Play) button or [PERFORMANCE (HOME)]  [Play/Rec]  [Pattern]  [Edit/Job]  [Note]  [Roll]
Operation
Start Step
Determines the size of the step (i.e., the number of clocks) between each note in the roll. You can create subdivided rolls by
setting small values between Start Step and End Step. This corresponds to the first clock value in the range that you specified.
Range: 015 – 999
End Step
Determines the size of the step (i.e. the number of clocks) between each note in the roll. You can create subdivided rolls by
setting small values between Start Step and End Step. This corresponds to the last clock value in the range that you specified.
Range:
015 – 999
Note
Determines the notes for which the Job is applied. You can set the Note directly from the Keyboard by touching the [Keyboard]
button.
Range: C -2 – G8
Start Velocity
Determines the velocity of the notes in the roll. This is the first Velocity value in the range that you specified.
Range: 001 – 127
End Velocity
Determines the velocity of the notes in the roll. This is the last Velocity value in the range that you specified.
Settings:
001 – 127
NOTE Determining the Start Velocity and End Velocity lets you create rolls that gradually increase or decrease in volume (crescendo/
decrescendo).
Execute
Executes the Job on the MIDI sequence data.
MODX Supplementary Manual
14