Yamaha MODX6 Supplementary Manual page 10

Hide thumbs Also See for MODX6:
Table of Contents

Advertisement

Strength
Sets the degree or "magnetic strength" to which Quantize is applied. A setting of 100% produces exact timing. A setting of 0%
results in no quantization.
Range:
0% – 100%
Swing Rate
This selectively delays the notes on even-numbered beats (backbeats) to produce a swing feel. For example, if the meter is 4/4
and the Quantize value is quarter notes, the 2nd and 4th beats of the measure will be delayed.
Settings:
Depends on specified Quantize value
If the Quantize value is 1/4 note, 8th note, 16th note, 32nd note:
If the Quantize value is 1/4 note triplet, 8th note triplet, 16th note triplet:
If the Quantize value is 8th note + 8th note triplet, 16th note + 16th note triplet:
Gate Time
Determines the gate time (the length of time a note sounds) of the even-numbered backbeat notes for enhancing the swing feel.
Range:
0% – 200%
Execute
Executes the Job on the MIDI sequence data.
Velocity
This Job alters the velocity values of a specified range of notes, letting you selectively boost or cut the volume of those notes.
NOTE
Velocity changes are calculated as follows
Adjusted Velocity = (Original Velocity x Rate) + Offset
If the result is 0 or less, the value is set to 1. If the result is higher than 127, the value is set to 127.
[R] (Play) button or [PERFORMANCE (HOME)]  [Play/Rec]  [Pattern]  [Edit/Job]  [Note]  [Velocity]
Operation
Set All
Sets the velocities of all target notes to the same fixed value. When set to "Off," the Set All parameter has no effect. When set to
a value other than "Off," the Rate and Offset parameters are unavailable.
Range:
Off, 001 – 127
Rate
Determines the percentage by which the target notes will be shifted from their original velocities. Range below 100% reduce the
velocities, and Range above 100% increase the velocities proportionately. When the Set All parameter is set to something other
than "Off," this parameter cannot be changed.
Range:
0% – 200%
MODX Supplementary Manual
0 – half of the triplet grid
0 – half of the triplet grid
0 – half of the triplet grid
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Modx7Modx8

Table of Contents