Turning The Machine On; Turning The Appliance Off - DeLonghi ECAM35075 Instructions For Use Manual

Fully automatic espresso and coffee machine
Hide thumbs Also See for ECAM35075:
Table of Contents

Advertisement

Available languages

Available languages

1. Plug the machine into the mains socket and press the main
switch (fig. 1). Make sure the main switch (A22) at the back
of the appliance is pressed (fig. 2);
The following messages will show on the display (B1):
2. "Language": press the selection arrow (B2) until the re-
quired language is displayed between the two dotted
lines, then press OK (B3) to confirm.
3. "Fill tank": remove the water tank (A17), fill to the MAX
line with fresh water (fig. 3A), then place back in machine
(fig. 3B);
3A 3A
3B
ance delivers hot water from the spout then goes off
automatically.
1
4.
"Insert water spout":
Check that the hot water
spout (C6) is inserted on
the connection nozzle
(A8) (fig. 4) and place a
container holding a min-
imum of 3.38 floz/100 ml
underneath (fig. 5);
5.
"Water circuit empty,
Fill water circuit, Hot
water, Confirm?";
5
6.
Press the OK button
to confirm. The appli-
The coffee machine is now ready for normal use.
Please note:
The first time you use the machine, you need to make 4-5
cappuccinos before it starts to give optimal results.
To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a
water softener filter (C4) as described in section "17. Water
softener filter".

5. TURNING THE MACHINE ON

Please note:
Before turning the appliance on, make sure the main switch
(A22) on the back of the appliance is pressed (fig. 2).
2
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, hot water comes out of the coffee spouts (A9)
and is collected in the drip tray (A15) underneath. Avoid contact
with splashes of water.
4
heats the internal circuits by circulating hot water.
The appliance is ready when the message "Select your bever-
age" is displayed.

6. TURNING THE APPLIANCE OFF

Whenever the machine is turned off after being used to make
espresso or coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, hot water flows from the coffee spouts (A9).
Avoid contact with splashes of water.
To turn the appliance off, press the
6);
8
To turn the appliance
on, press the
button (A7) (fig. 6). The
message "Heating Please
wait" appears on the dis-
play (B1).
After heating, the message
"Rinsing" is displayed, togeth-
er with a progress bar which
gradually fills as preparation
6
proceeds. As well as heating
the boiler, the appliance also
button (A7) (fig.

Advertisement

Table of Contents
loading

Table of Contents