Siemens PROFIBUS PA SIPART PS2 Manual page 76
Electropneumatic positioner for linear and rotary actuators
Hide thumbs
Also See for PROFIBUS PA SIPART PS2:
- Operating instructions manual (372 pages) ,
- Compact operating instructions (294 pages) ,
- Service manual (73 pages)
Table of Contents
Advertisement
Preparing for Operation
.
74
2.
Set the parameter with the
Display:
3.
Switch to the second parameter by pressing the operation mode
key
briefly. This has set automatically to 90°.
Display:
4.
Switch on to the following display with the operation mode key
5.
Start initialization by pressing the key
Display:
During the initialization phase "RUN1" to "RUN5" appear one after
another in the bottom display (see also structograms in figure 3-28,
page 78 to figure 3-31, page 81).
NOTE
The initialization process may last up to 15 minutes depending on the
actuator.
The initialization is complete when the following display
appears:
The top value indicates the total angle of rotation of the actuator
(example 93.5°).
-key to "turn"
for longer than 5 s.
SIPART PS2 PA Manual
A5E00127926-03
:
Advertisement
Table of Contents
